How Do I Fix My Samsung Galaxy S10 Not Charging?

How Do I Fix My Samsung Galaxy S10 Not Charging?

If you have issues with your Samsung Galaxy S10 not charging, there are a few things you can do to try and fix the problem.

First, make sure that the charger is an original Samsung product. If your charger is fine, there are several different things you can try such as rebooting the device or restarting your computer if it’s USB connected.

You can also reset your device by going to settings > reset > factory data reset. The only thing to note is that while it may fix the problem, you’ll lose all of your personal information. You’re basically wiping your phone.

The charging port may also be dirty. Try cleaning it with a dry cloth or you can try to unplug it for a few minutes and plug it back in. You can also change the power source if you are using laptop or a USB port on your PC, you can change to a wall socket for direct power supply.

You can also use wireless charging. For now, this is the best fix for your not charging problem. This will fix your charging problem because it bypasses all use of a charger or USB port to charge which resolves many issues and can also charge faster than most chargers.

With wireless charging you’re getting right to the battery source so that’s why it’s charging super-fast.

Finally, if none of these steps work, you should take it to a Samsung service center.

How Do I Fix My Samsung Galaxy S10 Wi-Fi Problems?

There are a few potential solutions to Samsung Galaxy S10 Wi-Fi problems. One solution is to forget the Wi-Fi network and then reconnect to it. To do this, simply turn on your phone and go to the Wi-Fi settings, tap Forget Network and then turn off the switch. However, this approach shouldn’t be the first choice as it will only disconnect from a specific network but not from all of them.

Another solution is to power off the phone and router for 30 seconds and then turn them back on. To do this , unplug the router and unplug the power adapter from your phone for 30 seconds. Turn them all back on, wait for about 1 minute and then turn on your Wi-Fi.

Another solution is to check if the router’s firmware needs to be updated. Do this by connecting to your router via a PC or a Mac, go to the router settings, scroll down to find the firmware version and make sure it’s up-to-date.

You can also re-set network settings to see if that resolves the problem. For this, tap Settings> General Management> Reset and select Reset to default. Then turn off Wi-Fi from the settings before turning it back on again to reconnect.

Finally, if none of these solutions work, a factory reset may be necessary.

How Do I Fix My Samsung Galaxy S10 Software Update Problems?

There are a few solutions to your Galaxy S10’s software update problems. If you’re on the automatic update, go to Settings> System> Software Update and select Check for updates.

If you’re on manual update, plug your device into a PC via USB and use Samsung SmartSwitch to check for updates.

For now, the Galaxy S10 line is up to date with the latest Android Pie. However, if you did not receive the most recent update, then it’s worth checking for any pending updates. For this, go to Settings> Software Update and check on your phone to see if there is a new update available.

If an update is available, then tap Download and Install to download it first. Then tap Install Updates to finish installing it. Wait until the installation process finishes and reboot your device once finished.

This can take a while, so do not turn off your phone before it finishes.

If there is no update available, you can try to install the update manually. To do this, turn your phone off then wait for about 30 seconds and then press and hold the power button to turn it back on. Once it’s turned on, use the Volume key to scroll down to Recovery mode and tap Power button to select it. Then choose the option Update from adb and press the Power key to confirm.

When your phone is in Recovery mode, plug it into a computer via the USB cable. Then download the firmware file on your computer and place it in an easy-to-reach location. Extract files from the zip file and then click start. The update will begin installing automatically. Wait until the installation process finishes, then select reboot system now once it’s done.

Once your phone has restarted, you can finish up by checking if the update was successful or not. To do this, go to Settings> Software Update and check to see the update version.

As of now, the most recent update is Oreo and Pie. However, it’s worth noting that the Oreo update was only available for some units while others received Pie instead. This seems to have been resolved now with Pie being rolled out across all devices.

If there’s still no update available for your phone, then you may need to factory reset it. To do this, go to Settings> About phone> Software Information and tap on the Factory Data Reset option.

The only known fix at the moment is a hard reset, which will delete all data. To do this, you need to format your phone so it can be restored to its factory settings. Android phones are generally designed to be upgradeable so that they can keep their ability to run software updates and future software releases.

How Do I Change The Samsung Galaxy S10 Display Size?

The default setting for your Samsung Galaxy S10 is full screen, which means that you’ll be able to enjoy all of the things to fit on your screen. However, this default setting may not be the most comfortable one as it will have a bigger screen area. To change your display size, follow the steps below:


  • Go to Settings > Display > Screen Zoom and tap on it .
  • Choose your preferred screen zoom among the three options : Standard, Full Body and Fit to Content.
  • You can also use this option to customize your screen zoom and make it more suitable for reading or for content you are used to seeing in a specific size.

How Do I Take Screenshots On Samsung Galaxy S10?

The Samsung Galaxy S10 is a great phone for taking pictures and videos. The phone has an excellent camera that can take high quality pictures and videos. To take a screenshot on the phone, simply press the Volume down and Power buttons at the same time.

The phone will take a picture of the current screen and save it to the phone’s memory.

The screenshot is stored in the Gallery app and can be accessed through the Gallery app. You can also take screenshots using a new feature that Samsung added to Android called “Shutter Up.” This allows you to take a screenshot by swiping on your screen.

You can use this picture to share on social media. To view a screenshot, open the Photos app. Tap the More tab and select Screenshots. From the Screenshots menu, you can open them or move them to the Library. You can also edit the screenshot before you save it.

You can also view a screenshot in the Notifications panel. The image will be saved as a notification icon in the status bar. Tap on it to view it.

Similar Posts