Nanostation M2 Price in Kenya: Expanding Connectivity

The Nanostation M2 Loco offers affordable and competitive prices for top networking solutions in Kenya. With its fast and reliable connectivity, this outdoor broadband CPE is the ideal choice for those seeking low-cost and budget-friendly options. Whether you’re looking to bridge networks or share broadband between buildings, the Nanostation M2 Loco has got you covered.

Featuring 2×2 MIMO technology, the Nanostation M2 Loco offers faster and farther links, ensuring seamless internet access with speeds of up to 150+ Mbps. Its range of up to 15km+ and intelligent QoS prioritization make it a cost-effective solution for high-capacity networks in Kenya.

Mounting the Nanostation M2 Loco is a breeze, thanks to the provided mounting straps. Simply attach it to a pole or mast, and you’re good to go. Please note that the current price of the Nanostation M2 Loco in Kenya is 7,200.00 KSh+VAT. However, due to its popularity, it is currently out of stock.

Key Takeaways:

  • Affordable Nanostation M2 with competitive prices for networking solutions in Kenya
  • Faster and farther links with 2×2 MIMO technology for seamless internet access
  • Range of up to 15km+ and intelligent QoS prioritization for cost-effective high-capacity networks
  • Easy installation and management with provided mounting straps
  • Price of the Nanostation M2 Loco in Kenya is 7,200.00 KSh+VAT (currently out of stock)

Features of the Nanostation M2 Loco

The Nanostation M2 Loco is packed with impressive features that make it a top choice for expanding connectivity in Kenya. Designed for outdoor use, this high-quality broadband CPE offers fast and reliable internet access. Powered by a robust Atheros MIPS 4KC processor running at 180MHz, the Nanostation M2 Loco delivers exceptional performance.

Operating on the 2.4GHz frequency, this device utilizes 2×2 MIMO technology to provide faster and farther links. With a range of up to 15km+ and a throughput of 150+ Mbps, it ensures seamless connectivity even over long distances. The Nanostation M2 Loco is equipped with 16MB SDRAM and 4MB Flash memory, ensuring efficient data storage and retrieval.

One standout feature of the Nanostation M2 Loco is its intelligent QoS prioritization, which optimizes streaming and enhances scalability for high-capacity networks. It also boasts a single 10/100 BASE-TX Ethernet port for seamless network integration. Whether you need to bridge networks or share broadband between buildings, the Nanostation M2 Loco offers a simple and effective solution.

Key Features:

  • Powerful Atheros MIPS 4KC processor
  • 2×2 MIMO technology for faster and farther links
  • Range of up to 15km+
  • Throughput of 150+ Mbps
  • 16MB SDRAM and 4MB Flash memory
  • Intelligent QoS prioritization for seamless streaming
  • Scalability for high-capacity networks
  • Single 10/100 BASE-TX Ethernet port

“The Nanostation M2 Loco is a game-changer in the realm of outdoor broadband CPEs. Its powerful processor, impressive range, and intelligent QoS prioritization make it a reliable and cost-effective choice for expanding connectivity in Kenya.”

Feature Description
Processor Atheros MIPS 4KC processor running at 180MHz
Frequency 2.4GHz
Memory 16MB SDRAM and 4MB Flash
Throughput 150+ Mbps
Range Up to 15km+
Interface 10/100 BASE-TX Ethernet port

Installation and Management of the Nanostation M2 Loco

Setting up and managing the Nanostation M2 Loco is a seamless process that ensures fast and reliable connectivity. To begin the installation, simply connect the device to an Ethernet cable at each end of the network. Whether you need to bridge networks or share broadband between buildings, the Nanostation M2 Loco acts as a transparent data-link layer bridge, eliminating the need for complex routing configurations.

Once the device is connected, managing the Nanostation M2 Loco is a breeze. You can choose from multiple management options including SSH, SNMP protocol, or the user-friendly HTTP interface. These options enable you to monitor and control the device based on your specific networking requirements.

Aligning the Nanostation M2 Loco is essential for optimal performance. With its intelligent alignment technology, you can easily fine-tune the device to ensure maximum signal strength and stability. This feature is particularly useful in long-distance point-to-point networking scenarios, where precise alignment plays a crucial role.

Powering the Nanostation M2 Loco is hassle-free with Power over Ethernet (PoE) support. This means that a single cable is all you need for both power and network traffic, eliminating the need for additional power outlets and cables. The PoE capability adds to the convenience and flexibility of installing the Nanostation M2 Loco in various outdoor settings.

FAQ

What is the price of the Nanostation M2 Loco in Kenya?

The price of the Nanostation M2 Loco in Kenya is 7,200.00 KSh+VAT. However, please note that it is currently out of stock.

What are the features of the Nanostation M2 Loco?

The Nanostation M2 Loco is equipped with a powerful Atheros MIPS 4KC processor running at 180MHz. It operates on the 2.4GHz frequency and has 16MB SDRAM and 4MB Flash memory. The networking interface includes one 10/100 BASE-TX Ethernet port. The device can deliver speeds of up to 150+ Mbps and features intelligent QoS prioritization for seamless streaming and scalability for high-capacity networks.

How do I install and manage the Nanostation M2 Loco?

To set up the Nanostation M2 Loco, simply connect it to an Ethernet cable at each end of the network. It can be used to bridge networks or share broadband between buildings without requiring any routing configuration. The device can be managed through SSH, SNMP protocol, or the intuitive HTTP interface. It is powered through Power over Ethernet (PoE) and requires one cable for both power and network traffic.

Similar Posts